FML-IP67 Dallas Key Fob Reader + Buzzer

Installation Guide

Please Follow the steps below for installation of your Dallas Key Fob Reader + Buzzer

Step 1

BROWN wire from the key fob reader connects to the RED wire from the unit (this is only to give power to the integrated L.E.D)

Step 2

YELLOW from key fob reader to WHITE wire from the unit

Step 3

GREY wire from key fob reader connects to the BLUE wire

Step 4

WHITE wire from the key fob reader connects to the GREEN wire from the unit

Step 5

This next step is ONLY if the vehicle runs on a 24V system, GREEN wire connects to the RED wire from the device

Step 6

For the buzzer portion of the this installation, connect the buzzer RED wire to the RED wire from the unit and the BLACK wire from the buzzer to the PINK wire from the unit